{"id":606,"date":"2019-07-28T13:22:51","date_gmt":"2019-07-28T12:22:51","guid":{"rendered":"http:\/\/projects.xief.net\/?p=606"},"modified":"2020-12-29T21:45:46","modified_gmt":"2020-12-29T20:45:46","slug":"pimp-my-weber-genesis-gas-grill","status":"publish","type":"post","link":"http:\/\/projects.xief.net\/?p=606","title":{"rendered":"Pimp my Weber Genesis Gas Grill"},"content":{"rendered":"<p>Still going after the perfect Pizza on the gas grill. After some improvements with the heat deflector, this time I wanted to raise the overall temperature in the grill. Even after running full power for like an hour the grill barely goes beyond 250C.<\/p>\n<p>What I tried this time was to add a second layer of metal below the lid, assuming that the double wall insulates better. It was actually fairly easy to push in a thin (0.7mm) steel sheet. Only problem was that it did scratch the paint of the Weber here and there. Let&#8217;s hope this is not too bad in the long run.<\/p>\n<p><strong>Result: Maxed out at around 320C. So definitely hotter than it was before. Success!<\/strong><\/p>\n<figure style=\"width: 3000px\" class=\"wp-caption alignnone\"><img decoding=\"async\" loading=\"lazy\" class=\"wp-image-622 size-full\" src=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1422435805273171546064678.jpg\" width=\"3000\" height=\"2250\" srcset=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1422435805273171546064678.jpg 3000w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1422435805273171546064678-300x225.jpg 300w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1422435805273171546064678-768x576.jpg 768w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1422435805273171546064678-1024x768.jpg 1024w\" sizes=\"(max-width: 3000px) 100vw, 3000px\" \/><figcaption class=\"wp-caption-text\">Before installation.<\/figcaption><\/figure>\n<figure style=\"width: 3000px\" class=\"wp-caption alignnone\"><img decoding=\"async\" loading=\"lazy\" class=\"wp-image-623 size-full\" src=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448379198996785234933661.jpg\" width=\"3000\" height=\"2250\" srcset=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448379198996785234933661.jpg 3000w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448379198996785234933661-300x225.jpg 300w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448379198996785234933661-768x576.jpg 768w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448379198996785234933661-1024x768.jpg 1024w\" sizes=\"(max-width: 3000px) 100vw, 3000px\" \/><figcaption class=\"wp-caption-text\">Started pushing the sheet in from there, therefore could not engage it behind all of those pegs. Some brute force got it around. Not pretty but it worked.<\/figcaption><\/figure>\n<figure style=\"width: 3000px\" class=\"wp-caption alignnone\"><img decoding=\"async\" loading=\"lazy\" class=\"wp-image-625 size-full\" src=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448406111795128817192378.jpg\" width=\"3000\" height=\"2250\" srcset=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448406111795128817192378.jpg 3000w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448406111795128817192378-300x225.jpg 300w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448406111795128817192378-768x576.jpg 768w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1448406111795128817192378-1024x768.jpg 1024w\" sizes=\"(max-width: 3000px) 100vw, 3000px\" \/><figcaption class=\"wp-caption-text\">Finally, sheet is in. Still have to fix the temperature sensor but then it is good to go.<\/figcaption><\/figure>\n<figure style=\"width: 3000px\" class=\"wp-caption alignnone\"><img decoding=\"async\" loading=\"lazy\" class=\"wp-image-624 size-full\" src=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_145549570853460592028830.jpg\" width=\"3000\" height=\"2250\" srcset=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_145549570853460592028830.jpg 3000w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_145549570853460592028830-300x225.jpg 300w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_145549570853460592028830-768x576.jpg 768w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_145549570853460592028830-1024x768.jpg 1024w\" sizes=\"(max-width: 3000px) 100vw, 3000px\" \/><figcaption class=\"wp-caption-text\">Some tweaking to get the temperature sensor in place, but worked ok.<\/figcaption><\/figure>\n<figure style=\"width: 3000px\" class=\"wp-caption alignnone\"><img decoding=\"async\" loading=\"lazy\" class=\"wp-image-626 size-full\" src=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1455525618546672747956120.jpg\" width=\"3000\" height=\"2250\" title=\"Final result with sheet in place\" srcset=\"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1455525618546672747956120.jpg 3000w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1455525618546672747956120-300x225.jpg 300w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1455525618546672747956120-768x576.jpg 768w, http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1455525618546672747956120-1024x768.jpg 1024w\" sizes=\"(max-width: 3000px) 100vw, 3000px\" \/><figcaption class=\"wp-caption-text\">Final result with sheet in place<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>Still going after the perfect Pizza on the gas grill. After some improvements with the [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":626,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[8],"tags":[],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"http:\/\/projects.xief.net\/wp-content\/uploads\/2019\/07\/img_20190727_1455525618546672747956120.jpg","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/paKOYN-9M","_links":{"self":[{"href":"http:\/\/projects.xief.net\/index.php?rest_route=\/wp\/v2\/posts\/606"}],"collection":[{"href":"http:\/\/projects.xief.net\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/projects.xief.net\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/projects.xief.net\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/projects.xief.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=606"}],"version-history":[{"count":1,"href":"http:\/\/projects.xief.net\/index.php?rest_route=\/wp\/v2\/posts\/606\/revisions"}],"predecessor-version":[{"id":627,"href":"http:\/\/projects.xief.net\/index.php?rest_route=\/wp\/v2\/posts\/606\/revisions\/627"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/projects.xief.net\/index.php?rest_route=\/wp\/v2\/media\/626"}],"wp:attachment":[{"href":"http:\/\/projects.xief.net\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=606"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/projects.xief.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=606"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/projects.xief.net\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=606"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}